Matrix: I-Station Configuration For AUX-101 GPI's on Eclipse
To access the two GPIs on the I-Station the panel must have an AUX-101 fitted to the panel. The logic functions are accessed from ECS software Matrix Hardware (or Card & Ports) advanced settings column. To properly wire a foot switch or similar switch to the GPI connector see diagram and instructions below.
To operate logic input #1, wire the foot switch or similar across pin A (pin 2 of DB-25F connector) and the +5 volt line (pin 2 of DB-25F). To complete the wiring connect a jumper wire between Digital Ground and pin B (jumper between pins 14 & 15 of DB-25F).
To operate logic input #2, wire the switch between pins 3 & 10 of the DB-25F and connect a jumper wire between pins 16 & 23 of the DB-25F to complete the wiring circuit.
Assign function(s) to the GPIs by accessing Eclipse software settings for the specific i-station via the Matrix Hardware (Card & Port)/ Advanced Settings / Logic Inputs, select a function for the logic input and apply/download to the Eclipse frame. See list below for available functions for Logic 1 and Logic 2.
To operate logic input #1, wire the foot switch or similar across pin A (pin 2 of DB-25F connector) and the +5 volt line (pin 2 of DB-25F). To complete the wiring connect a jumper wire between Digital Ground and pin B (jumper between pins 14 & 15 of DB-25F).
To operate logic input #2, wire the switch between pins 3 & 10 of the DB-25F and connect a jumper wire between pins 16 & 23 of the DB-25F to complete the wiring circuit.
Assign function(s) to the GPIs by accessing Eclipse software settings for the specific i-station via the Matrix Hardware (Card & Port)/ Advanced Settings / Logic Inputs, select a function for the logic input and apply/download to the Eclipse frame. See list below for available functions for Logic 1 and Logic 2.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.