Matrix: Eclipse V-Series panel connection to PA system diagram
Question: How do I go about creating a connection from my Eclipse frame / panels to an in-house PA system? I would like to activate a talk from my V-Panel using an "Stage Announce" key to activate an audio feed to the PA system.
Answer:
1. Connect input of a PA amplifier to unused MVX-A16 port of frame using 4-wire line level connections
2. Declare unused port as a DIRECT 4-wire and name it "STAGE ANNC"
3. Set port parameters as needed...
* latch disable
* output gain as needed (between -45db and +15db)
* in use tally
4. Place STAGE ANNC label on V-panel as a talk label
5. Apply change to frame - stage announce key is now ready to use.
Answer:
1. Connect input of a PA amplifier to unused MVX-A16 port of frame using 4-wire line level connections
2. Declare unused port as a DIRECT 4-wire and name it "STAGE ANNC"
3. Set port parameters as needed...
* latch disable
* output gain as needed (between -45db and +15db)
* in use tally
4. Place STAGE ANNC label on V-panel as a talk label
5. Apply change to frame - stage announce key is now ready to use.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.