/
Matrix: Are the Trunking comfort tone ports part of the 240 port limit?
Matrix: Are the Trunking comfort tone ports part of the 240 port limit?
- Administrator
Owned by Administrator
Apr 06, 2019
When setting the matrix 240 port limit does trunking comfort tones use "ports"?
ECS defaults these to ports 237, 238 and 239 Does itreduce the max quantity to 237 instead of 240?
Answer: They are not part of the 240.They should be set to port numbers not otherwise used < 1024…unless you want to actual attach tone or a recording to the portsop that the operator when they see NO TRK also hear an error message or tonethat is played into the matrix from that port
If you are using fibre do not go over 800. If you are using FreeSpeak EQUE do not go over 600. It is ok put them just over 512.
ECS defaults these to ports 237, 238 and 239 Does itreduce the max quantity to 237 instead of 240?
Answer: They are not part of the 240.They should be set to port numbers not otherwise used < 1024…unless you want to actual attach tone or a recording to the portsop that the operator when they see NO TRK also hear an error message or tonethat is played into the matrix from that port
If you are using fibre do not go over 800. If you are using FreeSpeak EQUE do not go over 600. It is ok put them just over 512.
, multiple selections available,
Related content
Matrix: Why do I get error messages about ECS comfort tone duplicate ports?
Matrix: Why do I get error messages about ECS comfort tone duplicate ports?
More like this
Matrix: Avoiding the 240 ports limit for big systems
Matrix: Avoiding the 240 ports limit for big systems
More like this
Matrix: What are Comfort Tones used for in ECS Intelligent Linking?
Matrix: What are Comfort Tones used for in ECS Intelligent Linking?
More like this
Matrix: what is the system port count in EHX V7.0 (or later versions)
Matrix: what is the system port count in EHX V7.0 (or later versions)
More like this
Matrix: What is the best value for the E-FIB card port count setting?
Matrix: What is the best value for the E-FIB card port count setting?
More like this
Matrix: How should the port count on a E-FIB card be properly set?
Matrix: How should the port count on a E-FIB card be properly set?
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.