Clock and Scalable Timer for Logic Maestro
Sometimes when using Logic Maestro it would be useful to have a clock and timer circuit to allow you to have time delays on logic actions.
The attached Logic Maestro file provides a clock which will start running when a control trigger is received, this trigger will also activate a crosspoint action.
Once the trigger is removed the cross point action remains active and the clock drives a counter constructed from Latches which will cause the triggered action to delatch after a period of time.
The time period can be varied by experimenting with which latch outputs are used to drive the inputs of the AND gate.
The attached Logic Maestro file provides a clock which will start running when a control trigger is received, this trigger will also activate a crosspoint action.
Once the trigger is removed the cross point action remains active and the clock drives a counter constructed from Latches which will cause the triggered action to delatch after a period of time.
The time period can be varied by experimenting with which latch outputs are used to drive the inputs of the AND gate.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.