IP LQ: Can I use the LQ unit to replace my voice2 units?
Yes, you can use your LQ-4wire units to replace the now discontinued Voice2 units.
Using a pair of LQ 4wire units (locally & remote) you can connect the following panels over IP back to a central matrix like a Pico frame.
V-series panels
I-stations
ICS1008/1016E panels
In the LQ CCM (web browser) set up DIRECT channels and place a 4wire port from the local and remote LQ units in to a Direct channel
Then set the LQ connected to the matrix (MVX port) to its have 4wire port function set to > "connect to matrix"
Then set the LQ connected to directly to the intercom panel (matrix comms) to have its have 4wire port function set to > "connect to panel"
Using a pair of LQ 4wire units (locally & remote) you can connect the following panels over IP back to a central matrix like a Pico frame.
V-series panels
I-stations
ICS1008/1016E panels
In the LQ CCM (web browser) set up DIRECT channels and place a 4wire port from the local and remote LQ units in to a Direct channel
Then set the LQ connected to the matrix (MVX port) to its have 4wire port function set to > "connect to matrix"
Then set the LQ connected to directly to the intercom panel (matrix comms) to have its have 4wire port function set to > "connect to panel"
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.