Matrix: Eclipse FOR-22 interface card audio setup / connection information quick card
Front Panel Controls and Indicators
Send Level Control—allows adjustment of output level from matrix to external device (10 db adjustment range)
Recv Level Control—allows adjustment of signals sent from ext. device to the Matrix (10 db adjustment range)
(initially set controls to mid-position)
Send Level LED—2 color LED lights green when audio is detected, LED lights red on over modulation
Relay Active LED—yellow LED lights when the relay is activated
Audio Output Level Jumpers (JP100 and JP200 on pcb)
Allows the user to set operating level of transformer isolated output. User can select following settings:
Line level (0 dBv at 600 ohms)
IFB level (-15 dBv at 200 ohms)
Mic level (-55 dBv at 20 ohms) --> Use for initial setting on 2-way / SINCGARs Military Radios
See jumper JP200 for channel 2 and JP100 for channel 1.
DB-9M connector
Audio Output—audio output from Eclipse Frame
Audio Input—audio input to Eclipse Frame
Logic input—will generate a call signal to the Matrix from an external device
Relay Contacts—normally open and closed contacts that can be controlled via ECS
ECS Software Settings / Ports and Cards / Advanced Settings
Input / Output Eclipse Frame port Adjustment range is -45 db to +15 db
Use 2-Way Radio setting for 2-Way Radio / Sincgars Military Radios
See attachment below for complete FOR-22 document quick start card.
Send Level Control—allows adjustment of output level from matrix to external device (10 db adjustment range)
Recv Level Control—allows adjustment of signals sent from ext. device to the Matrix (10 db adjustment range)
(initially set controls to mid-position)
Send Level LED—2 color LED lights green when audio is detected, LED lights red on over modulation
Relay Active LED—yellow LED lights when the relay is activated
Audio Output Level Jumpers (JP100 and JP200 on pcb)
Allows the user to set operating level of transformer isolated output. User can select following settings:
Line level (0 dBv at 600 ohms)
IFB level (-15 dBv at 200 ohms)
Mic level (-55 dBv at 20 ohms) --> Use for initial setting on 2-way / SINCGARs Military Radios
See jumper JP200 for channel 2 and JP100 for channel 1.
DB-9M connector
Audio Output—audio output from Eclipse Frame
Audio Input—audio input to Eclipse Frame
Logic input—will generate a call signal to the Matrix from an external device
Relay Contacts—normally open and closed contacts that can be controlled via ECS
ECS Software Settings / Ports and Cards / Advanced Settings
Input / Output Eclipse Frame port Adjustment range is -45 db to +15 db
Use 2-Way Radio setting for 2-Way Radio / Sincgars Military Radios
See attachment below for complete FOR-22 document quick start card.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.