Matrix: Can I wire up a footswitch to an ICS-2003 panel to toggle talks on/off?
The miscellaneous DB-15 connector on the rear panel of the ICS-2003 can be used to achieve toggling talks on and off via a foot switch.
Logic inputs 1 and 2 can be used to do this. Once the foot switch is wired to a logic input (logic 1 - pin 5, logic 2 - pin 12, logic grounds pins 4 and 11) the user will go to ECS and open the matrix hardware screen. Go to the port the ICS-2003 resides on and go to the advanced settings column and look for Logic Input 1 or 2 and select the function of the logic input via the pull down menu (for example select mic on/off or activate talk switch 1 or activate talk switch 2).
Once this is accomplished apply the change in ECS to enable the change in the panel.
Logic inputs 1 and 2 can be used to do this. Once the foot switch is wired to a logic input (logic 1 - pin 5, logic 2 - pin 12, logic grounds pins 4 and 11) the user will go to ECS and open the matrix hardware screen. Go to the port the ICS-2003 resides on and go to the advanced settings column and look for Logic Input 1 or 2 and select the function of the logic input via the pull down menu (for example select mic on/off or activate talk switch 1 or activate talk switch 2).
Once this is accomplished apply the change in ECS to enable the change in the panel.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.