Partyline: How do I rewire a CC-95 headset for use with an RTS BP-325 beltpack with a 5-pin male XLR?
Question: I have some spare CC-95 headsets that I want to use with RTS BP-325 headsets, but the headsets have 4-pin female XLR connectors. How do I rewire these headsets to 5-pin male XLR connectors? Is a wiring diagram available?
Answer: To rewire the headsets to 5-pin male XLRs use the wiring diagram shown below. Leave pin 5 on the XLR open as the RTS BP-325 supports both Left ear and Right ear headset outputs, simply wire the CC-95 headset to the left ear output only (pin 4). Do not jumper pin 4 to pin 5, this will load down the headset output and cause the beltpack to draw more current than necessary.
Answer: To rewire the headsets to 5-pin male XLRs use the wiring diagram shown below. Leave pin 5 on the XLR open as the RTS BP-325 supports both Left ear and Right ear headset outputs, simply wire the CC-95 headset to the left ear output only (pin 4). Do not jumper pin 4 to pin 5, this will load down the headset output and cause the beltpack to draw more current than necessary.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.