Matrix: Can I access logic input 3 and 4 on a V-Series panel directly or from ECS 5.2?

The V-Series panels (pushbutton, lever key and rotary panel versions) all have logic inputs that can be physically accessed from the rear panel control DB-25F connector.  Logic inputs 1 and 2 are programmed from ECS advanced settings. 

The following actions are available for both Logic Input 1 and Logic Input 2:
• No Function
• Mic On/Off
• Mute Mic Output to Frame
• Mic Off (Momentary)
• Answerback Talk Clear
• Studio Announce
• Speaker Off
• PTT Activate all Talk Keys
• Activate Talk Switch 1
• Activate Talk Switch 2
• Activate Listen Labels
• PTT Activate Two Way Radio Talk Keys
• Select Route (enters a sub menu that allows selection of talk or listen path to a panel, group, partyline or controls)
The default setting is No Function.
Note: Logic Inputs 3 and 4 are only available on V-Series panels. 
Logic inputs 3 is pre-assigned to the Reply Key.
Logic input 4 is not currently used.


This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.