Partyline: How do I wire a audio program input to RS-702 beltpack?
The RS-702 Encore Series Beltpacks are capable of accepting a balanced line level program audio feed.
This is accomplished by using pins 5 and 6 of the 6-pin XLR intercom feed. The ground for the program audio feed is brought in on pin 1.
The thumb wheel control on the bottom pane of the RS-702 Beltpack only attenuates the signal received on Pins 5 & 6 of the XLR-6 connector.
It will NOT attenuate the program audio (signal embedded and sent through with the intercom audio signal of CH A/B) if the signal is sent through from the Mainstations.
Please see the diagram below for the locations of the pins.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.