How do I inject program audio to a channel on my MS_704?

On the back panel of the MS-704, you plug program audiointo the program XLR input.   Then remove thefront panel cover plate on the bottom-front of the MS-704 and select the channel (A, B, C or D)that you want the audio to be injected on to on the PROGRAM dip switches.  Then you take your small screwdriver andadjust the amount of that audio you want on the channel on the pot associatedto that channel.  When done, replace thecover and you’re done. 


This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.