Matrix: What is the network bandwidth requirement for IVC-32 and V-Series-IP panels
The IP networking requirements are directly related to the number of V series IP Panels that are connected over the network and the connection type set on each panel.Also note that the IP network may have to carry other traffic, such as communication between the Concert server and PC concert clients.
You can use the following table to estimate the bandwidth requirements for audio data when using IP Panels. The total utilisation of the network should never exceed 20% of its nominal capacity.
Bandwidth requirements for audio data when using IP Panels
| LAN (kbps) | WAN (kbps) | Internet (kbps) | |
|---|---|---|---|
| Half Duplex from IVC32/E-IPA to panel | 120 | 90 | 140 |
| Half Duplex from Panel to IVC32/E-IPA | 120 | 90 | 140** |
| Max jitter buffer (ms) | 80 | 120 | 200 |
** Note: Silence suppression is enabled from Panel to Matrix, and Forward Error Correction module is ON both ways. The FEC module increases bandwidth but will support ~5% packet loss without affecting audio and keep acceptable audio up to ~10% loss.
This also relates to IVC-32 trunk and direct lines
see attached
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.