Matrix: V-Panel Display Dim Timer and Screen Saver Timer operation
Display Dim TimerSets the time interval in minutes before the display on an inactive panel is dimmed to prevent damage to the display. To adjust the time setting select the timer box in setup matrix hardware/advanced settings/panel options to display the adjustment slider and use the mouse to drag the slider to the required setting. The timer is adjustable from 0 minutes to 60 minutes. If the timer is set to 0 minutes the display is set to dim permanently. If the dim timer is set to a value other than “Always Dim” the screen saver timer will only start after the screen has dimmed. For example if the dim timer is set to 1 minute and the screen saver timer is set to 1 minute the screen saver will start after 2 minutes.
Screen Saver TimerThe screen saver timer facility sets the length of time a panel is inactive elapse before the screen saver is displayed. The screen saver is used to prevent the display being damaged by being left for long periods with the same display. The time may be set to any value between 1 and 60 minutes. It cannot be disabled. If the dim timer is set to a value other than “Always Dim” the screen saver timer will only start after the screen has dimmed. For example if the dim timer is set to 1 minute and the screen saver timer is set to 1 minute the screen saver will start after 2 minutes.
These settings can be found in ECS> setup - matrix hardware> port - advance settings
Screen Saver TimerThe screen saver timer facility sets the length of time a panel is inactive elapse before the screen saver is displayed. The screen saver is used to prevent the display being damaged by being left for long periods with the same display. The time may be set to any value between 1 and 60 minutes. It cannot be disabled. If the dim timer is set to a value other than “Always Dim” the screen saver timer will only start after the screen has dimmed. For example if the dim timer is set to 1 minute and the screen saver timer is set to 1 minute the screen saver will start after 2 minutes.
These settings can be found in ECS> setup - matrix hardware> port - advance settings
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.