Matrix: What settings do I use when I have IP panels on both local / remote networks using NAT routing?
I have a number of IP panels connected on local LAN and also connected via the public internet . What rules do I need to put into my Gateway router using NAT
See attached for general information
a) PDF Page #1 : What settings to use whencustomer has ONE public IP address :
b) PDF Page # 2: What settings to apply whenyou have TWO different public IP addresses
See attached for general information
a) PDF Page #1 : What settings to use whencustomer has ONE public IP address :
b) PDF Page # 2: What settings to apply whenyou have TWO different public IP addresses
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.