What are the RJ-45 pinouts for E1 / T1 signals on the E-Que Card?
The E1/T1 signals at the RJ-45 on the rear of the E-Que card are:
Pin 1 TX Tip +ve
Pin 2 TX Ring –ve
Pin 3 DECT Sync +ve (for Cellcom/FreeSpeak connection to Antennae)
Pin 4 RX Tip +ve
Pin 5 RX Ring –ve
Pin 6 DECT Sync –ve
Pin 7 no connection
Pin 8 no connection
Pin 1 TX Tip +ve
Pin 2 TX Ring –ve
Pin 3 DECT Sync +ve (for Cellcom/FreeSpeak connection to Antennae)
Pin 4 RX Tip +ve
Pin 5 RX Ring –ve
Pin 6 DECT Sync –ve
Pin 7 no connection
Pin 8 no connection
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.