Matrix: Eclipse: How do I connect up RTS Power supply and BP-300 or 325 belt packs to CCI-22 DB-9?
To attach the above RTS products to an Eclipse CCI-22 (single) DB-9 make the following connections:
RTS PS-8 XLR Pin CCI-22 Pin(s) on DB-9
1 (GND) Link pins 1,6 (RTS product ID) & 2,7 (GND)
2 (+Vdc and CH A audio) Link pins 3,8 (CH A and B +Vdc) & 4 (CH A audio)
3 (CH B audio) 9 (CH B audio)
Pins 1 and 6 need to be grounded to "tell" the CCI-22 a RTS product is being connected to both Channel, A (pin 1) and Channel B (pin 6). Shorting pin 3 to pin 4 inputs +Vdc and audio in to CH A
RTS PS-8 XLR Pin CCI-22 Pin(s) on DB-9
1 (GND) Link pins 1,6 (RTS product ID) & 2,7 (GND)
2 (+Vdc and CH A audio) Link pins 3,8 (CH A and B +Vdc) & 4 (CH A audio)
3 (CH B audio) 9 (CH B audio)
Pins 1 and 6 need to be grounded to "tell" the CCI-22 a RTS product is being connected to both Channel, A (pin 1) and Channel B (pin 6). Shorting pin 3 to pin 4 inputs +Vdc and audio in to CH A
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.