Matrix: What are the different panel to matrix connectivity options
Clear-Com offers a number of different options to connect the panel to the matrix
The V series panel can becabled to the matrix in a number of ways (see attached)
The V series panel can becabled to the matrix in a number of ways (see attached)
u ANALOGUE-CAT5.The panel to matrix run lengthcan be up to 1kM (5/8 mile). Using a straight CAT5 /5e/6 (STP) cables
u COAX- using 75ohm video cable using the AES-3daughter card fitted to the panel. The maximum distance is 500m.
Can alsoprovide 2 audio channels (matrix1, matrix 2) to / from the panel
u DIGITAL-CAT5 using CAT5 cable using the AES-3daughter card fitted to the panel. Using 120 ohm CAT5 cable. The maximum distance200m. This method allows the panel to be routed via AES-3 backboneinfrastructures.
Can also provide 2 audio channels (matrix 1, matrix 2) to /from the panel
u T-Adaptor using Braid shielded CAT5e/CAT6e STPcable or standard microphone cable using the T-adaptor daughter card fitted o thepanel. The maximum distance is 3Km @24AWG or 2.2Km @26AWG. The V-panel must be connected to a DIG-2 interfaceframe
u IP using CAT5 cable using the Ethernetconnector on the rear of the panel. The maximum distance 100m from a Ethernet switch. This method allows the panel to be routed via the IP /LAN infrastructure.(see attached)
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.