Matrix: Can I use a FIM-202 on Matrix interfaces as well as Panels?

With a pair of FIM-202 fiber interfaces the user can remote one or two Eclipse or Matrix ports from the frame to distances further than what CAT-5 can support (CAT-5 can be used up to 3000 feet (1000m) when directly connected to a frame MVX-16 port.)Using FIM-202 fiber interfaces the users can remote panels up to 12 miles (19Km) from the frame over single mode fibre cable.
The user can remote two Eclipse or Matrix+3 panels using the FIM-202.The user can also use the FIM-202 to remote the following interfaces: CCI-22, TEL-14, FOR-22
For example, using a Clear-Com CCI-22 dual party-line interface at one end, you can connect two independent, external 2-wireparty line systems to the central matrix over large distances.  Or, with a Clear-Com TEL-14 Telephone Interface Module, you can send telephone audio to the central matrix over a secured, interference-free fiber-optic line.  By using a Clear-Com FOR-22 4-wire interface module, you can send 4-wire audio plus transmit keying over afiber-optic line.  You can also use a Clear-Com EF-701M to interface 2-wire Clear-Com or RTS party lines to the central matrix over a fiber-optic link.

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT


This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.