Matrix: How do I create a global IFB? NOTE: this is for ECS matrix and not EHX newer than 8.5
Global IFB means that any panel on the system will be interrupting the fold back audio going out on the IFB port.
It's a 4 step process...
1. You need to enable the "Global IFB" on the "Advanced Settings" for the IFB port and set the dim level or cutting level.
2. Add the IFB label to the panel or panels that need to talk to the IFB destination
3. Route the audio to the IFB, for this, go to "Local advanced"->"Forced listen" and add a crosspoint from the PGM (source) port to the IFB destination port.
4. Do an "Apply changes to frame"
It's a 4 step process...
1. You need to enable the "Global IFB" on the "Advanced Settings" for the IFB port and set the dim level or cutting level.
2. Add the IFB label to the panel or panels that need to talk to the IFB destination
3. Route the audio to the IFB, for this, go to "Local advanced"->"Forced listen" and add a crosspoint from the PGM (source) port to the IFB destination port.
4. Do an "Apply changes to frame"
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.