Matrix: Can I link a Drake 4000 Hi-que card to an Eclipse E-QUE card ?
Yes you can connect a Drake 4000 Hi-QUE card to an Eclipse Matrix with a E-QUE card
A number of customers have successfully connected audio tie-lines between a Drake 4000 matrix fitted with a HI-QUE card and a Eclipse Matrix fitted with E-QUE card
Both cards support the E1 protocol and can pass 30 channels of audio over 1 CAT-5 cable
Both cards must be set to Audio (E1-direct) mode only . You will need to make a E1 cross over cable
Drake 4000 system cannot be intelligently linked to Eclipse matrices. You can only pass audio between them
A number of customers have successfully connected audio tie-lines between a Drake 4000 matrix fitted with a HI-QUE card and a Eclipse Matrix fitted with E-QUE card
Both cards support the E1 protocol and can pass 30 channels of audio over 1 CAT-5 cable
Both cards must be set to Audio (E1-direct) mode only . You will need to make a E1 cross over cable
Drake 4000 system cannot be intelligently linked to Eclipse matrices. You can only pass audio between them
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.