Helixnet: What is the Two-wire interface module (HLI-2W2) for HelixNet?
Two-wire interface module (HLI-2W2) This is a two channel device that enables interoperability with Tempest, CellCom / FreeSpeak, and HME DX210 systems, and both Clear-Com and RTS analogue party-line systems. The module provides two analogue party-line connectors (3 pin female XLR connectors). Use HelixNet main station menus to set the module for either RTS or Clear-Com systems. If RTS mode is selected,
you can set either: • Pin 1 – common for audio and DC • Pin 2 for power (30 Vdc and mixed audio channel 1 or 3) • Pin 3 for power (30 Vdc and mixed audio channel 2 or 4). Pin Out for the 3 pin female XLR connectors.
you can set either: • Pin 1 – common for audio and DC • Pin 2 for power (30 Vdc and mixed audio channel 1 or 3) • Pin 3 for power (30 Vdc and mixed audio channel 2 or 4). Pin Out for the 3 pin female XLR connectors.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.