HelixNet: What are the power options for the IKB-12 user panel?
The IKB-12 industrial user panel can only be powered via an Ethernet PoE switch running CAT-5/6 cable to the panel's RJ45 jack.
There are no options to locally power a panel via a wall wart power supply or via the HMS-4X main station power lines one or two.
Each IKB-12 user panel draws approximately 5 watts when connected to a PoE switch. Up to 64 IKB-12 panels can be connected to an Ethernet module equipped HMS-4X main station.
The IKB-12 follows normal Ethernet installation rules and can only be placed up to 100m away from the nearest Ethernet switch.
The diagram below shows a typical system setup:
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.