IP-LQ: How does LQ-2W2 operate in RTS mode
- Administrator
Owned by Administrator
Apr 06, 2019
1 min read
Loading data...
Customer wanted to know how LQ-2W2 deals with RTS beltpacks / partyline systems
When LQ-2W2 is in RTS mode the audio from CH1 (pin 2) is put on Port A and CH 2 (pin 3) is put on Port B. Also the two XLR port jacks become parallel jacks so an RTS beltpack or com line can be plugged into either or both PL XLRS.
When LQ-2W2 is in RTS mode the audio from CH1 (pin 2) is put on Port A and CH 2 (pin 3) is put on Port B. Also the two XLR port jacks become parallel jacks so an RTS beltpack or com line can be plugged into either or both PL XLRS.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.
We are looking for your help! Please consider sharing your stories, update an old solution or help us with a new one. Follow this link to share!