Matrix: Can I connect V-series Panels with coax interface via LAWO infrastructure

V-series panels fitted with the AES coax daughter card can be connected over 3rd party AES-3 networks back to an Eclipse matrixThis allows the V-series panel to use the installed AES-3 network as a transparent transport layer.
The Eclipse matrix should be fitted with a AES-6 card (firmware version V2.0.2 or later). The AES-6 card should be set into 3rd party mode by setting the appropriate dip switch on the front of the AES-6 card.
For integration with a LAWO AES-3 network - make sure the LAWO system is fitted with the 943/82 intercom coax card.


This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.