Matrix: Can ICS-21, 22 and 24 panels be used with Eclipse matrices?
All three panels can be indirectly configured to work with ECS 5.1.1 Eclipse frames. See notes for each panel type in order to program talk and listen keys properly and diagram below illustrating proper key placement.
ICS-21 - The Eclipse Configuration System (ECS) software does not directly support the ICS-21 speaker panel. In order to configure an ICS-21 panel the port is configured to drive an ICS-1008 panel with 14 keys (7 pairs of buttons). The ICS-21 channel is mapped onto the ICS-1008 keys starting from the left. Only the leftmost pair of keys on the ICS-1008 can be used to program the ICS-21; any other keys on the ICS-1008 will have no effect. There must be a corresponding listen key on the top row to the talk key on the bottom row of the ICS-1008 configuration for the ICS-21 panel to work
ICS-22 - The Eclipse Configuration System (ECS) software does not directly support the ICS-22 speaker panel. In order to configure an ICS-22 panel the port is configured to drive an ICS-1008 panel with 14 keys (7 pairs of buttons). The two ICS-22 selectors are mapped onto the ICS-1008 keys starting from the left. Only the leftmost two pairs of keys on the ICS-1008 can be used to program the ICS-22; any other keys on the ICS-1008 will have no effect. There must be a corresponding listen key on the top row to the talk key on the bottom row of the ICS-1008 configuration for the ICS-22 panel to work correctly. If a talk key only is configured on the ICS-1008 in ECS the Talk key on the ICS-22 will not latch.Solution update May-2017 ICS-22 panel will now work on EHX v9.0 or later systems
Other panel types are not supported / are obsolete
ICS-24 - The Eclipse Configuration System (ECS) software does not directly support the ICS-24 headset panel. In order to configure an ICS-24 panel the port is configured to drive an ICS-1008 panel with 14 keys (7 pairs of buttons). The ICS-24 channels are mapped onto the ICS-1008 keys starting from the left. Only the leftmost four pairs of keys on the ICS-1008 can be used to program the ICS-24; any other keys on the ICS-1008 will have no effect. There must be a corresponding listen key on the top row to the talk key on the bottom row of the ICS-1008 configuration for the ICS-24 panel to work correctly. If a talk key only is configured on the ICS-1008 in ECS the Talk key on the ICS-24 will not latch.
ICS-21 - The Eclipse Configuration System (ECS) software does not directly support the ICS-21 speaker panel. In order to configure an ICS-21 panel the port is configured to drive an ICS-1008 panel with 14 keys (7 pairs of buttons). The ICS-21 channel is mapped onto the ICS-1008 keys starting from the left. Only the leftmost pair of keys on the ICS-1008 can be used to program the ICS-21; any other keys on the ICS-1008 will have no effect. There must be a corresponding listen key on the top row to the talk key on the bottom row of the ICS-1008 configuration for the ICS-21 panel to work
ICS-22 - The Eclipse Configuration System (ECS) software does not directly support the ICS-22 speaker panel. In order to configure an ICS-22 panel the port is configured to drive an ICS-1008 panel with 14 keys (7 pairs of buttons). The two ICS-22 selectors are mapped onto the ICS-1008 keys starting from the left. Only the leftmost two pairs of keys on the ICS-1008 can be used to program the ICS-22; any other keys on the ICS-1008 will have no effect. There must be a corresponding listen key on the top row to the talk key on the bottom row of the ICS-1008 configuration for the ICS-22 panel to work correctly. If a talk key only is configured on the ICS-1008 in ECS the Talk key on the ICS-22 will not latch.Solution update May-2017 ICS-22 panel will now work on EHX v9.0 or later systems
Other panel types are not supported / are obsolete
ICS-24 - The Eclipse Configuration System (ECS) software does not directly support the ICS-24 headset panel. In order to configure an ICS-24 panel the port is configured to drive an ICS-1008 panel with 14 keys (7 pairs of buttons). The ICS-24 channels are mapped onto the ICS-1008 keys starting from the left. Only the leftmost four pairs of keys on the ICS-1008 can be used to program the ICS-24; any other keys on the ICS-1008 will have no effect. There must be a corresponding listen key on the top row to the talk key on the bottom row of the ICS-1008 configuration for the ICS-24 panel to work correctly. If a talk key only is configured on the ICS-1008 in ECS the Talk key on the ICS-24 will not latch.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.