Matrix: How do I send a PL call signal from an Eclipse system to an Encore PL system?
Question: Is it possible to make a call signal from an Eclipse panel to an attached Encore PL system connected via a CCI-22 interface card (call light PL RS-600 series beltpack, FL-7 flasher, PL main stations, remote stations and wall mount user panels)?
Answer: Yes, in ECS the user has to setup the CCI-22 interface card to enable the Encore PL system to receive PL call signals on the various PL system components mentioned above.
Go to Matrix Hardware / Cards and Ports and find the port declared as the CCI-22 (if more than one PL channel is connected back to the Matrix each port needs to be enabled).
A. Go to the Advanced Settings column on the right hand side of the screen and find Global Settings, highlight "Auto Signal" and set this parameter to "TRUE", see picture below.
B. Apply this change in ECS software to enable the port on the frame for Auto Signal.
C. From any Eclipse panel; pressing a talk key to the external Encore PL system (via the CCI-22 port) will generate a call signal to all units on the Encore PL channel
D. Observe the wired PL channel system components display a call signal continuously until the key is released
Answer: Yes, in ECS the user has to setup the CCI-22 interface card to enable the Encore PL system to receive PL call signals on the various PL system components mentioned above.
Go to Matrix Hardware / Cards and Ports and find the port declared as the CCI-22 (if more than one PL channel is connected back to the Matrix each port needs to be enabled).
A. Go to the Advanced Settings column on the right hand side of the screen and find Global Settings, highlight "Auto Signal" and set this parameter to "TRUE", see picture below.
B. Apply this change in ECS software to enable the port on the frame for Auto Signal.
C. From any Eclipse panel; pressing a talk key to the external Encore PL system (via the CCI-22 port) will generate a call signal to all units on the Encore PL channel
D. Observe the wired PL channel system components display a call signal continuously until the key is released
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.