Partyline: What is the wiring pin-outs for the CC-300 / CC-400 headsets to a 4-pin XLR-F connector?
Shown below are the 4-pin XLR-F connector wiring diagram for the recently released Clear-Com CC-300 and CC-400 series headsets. Note that the wiring diagram shows the wire connections from the 4-pin XLR to a removable headset connector. This allows for the rapid replacement of the entire headset cable assembly when the need arises for 4-pin XLR-F, 5-pin XLR male and female, 6-pin XLR male and 7-pin XLR female.
Also listed below are the impedance specifications for both models.
Headphone
Type: Closed-back
Driver: 40mm diameter, neodymium magnet, copper-clad aluminium wire voice coil
Frequency Response: 40Hz - 20kHz
Microphone
Element: Dynamic
Polar Pattern: Hyper-cardioid
Frequency Response: 300Hz - 20kHz
Impedance
CC-300 Headphone: 400 ohms ±30%; at 1kHz typical
CC-400 Headphone: 200 ohms ±30%; at 1kHz typical
Microphone: 200 ohms ±30%; at 1kHz typical
Also listed below are the impedance specifications for both models.
Headphone
Type: Closed-back
Driver: 40mm diameter, neodymium magnet, copper-clad aluminium wire voice coil
Frequency Response: 40Hz - 20kHz
Microphone
Element: Dynamic
Polar Pattern: Hyper-cardioid
Frequency Response: 300Hz - 20kHz
Impedance
CC-300 Headphone: 400 ohms ±30%; at 1kHz typical
CC-400 Headphone: 200 ohms ±30%; at 1kHz typical
Microphone: 200 ohms ±30%; at 1kHz typical
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.