Partyline: How do I connect my Helixnet main stationto a Eclipse-Pico
To connect your Helixnet main station to an Eclipse Pico
a) make sure the Helixnet main station has 4wire module fitted b) using a straight CAT-5 cable connect the Helixnet main station (via the 4wire module) to one of the 4wire ports on the Pico
c) on the Helixnet main station assign the 4wire to one of the 4 channels
d) on the Pico , assign talk / listen keys to the panels to access the Helixnet main stationin the hardware card/ports screen - set the port type to CCI-22 , this will allow the panels to send and receive call signal from the Helixnet main station or beltpacks
a) make sure the Helixnet main station has 4wire module fitted b) using a straight CAT-5 cable connect the Helixnet main station (via the 4wire module) to one of the 4wire ports on the Pico
c) on the Helixnet main station assign the 4wire to one of the 4 channels
d) on the Pico , assign talk / listen keys to the panels to access the Helixnet main stationin the hardware card/ports screen - set the port type to CCI-22 , this will allow the panels to send and receive call signal from the Helixnet main station or beltpacks
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.