Partyline: Motorola Bearcat BC130 wiring information to TW-47
The Motorola Bearcat BC130 2-way radio uses the Motorola M1 type audio connector for accessory headsets and or speaker mic connections.
From the TW-47 user manual chapter 2 installation page use the diagram (see above) for the Motorola GP300 series / SP-50 / Sport 7X to wire the radio to a TW-47 DB-9M connector. Initially set the internal TW-47 jumpers S7 and S8 according to transmit gain requirements. To get a molded connector order Motorola part # HMN9787DR headset with swivel boom mic, cut off the headset end and wire the cable to the DB-9M connector.
Note: The wiring for this solution is not verified by Clear-Com applications engineering.
From the TW-47 user manual chapter 2 installation page use the diagram (see above) for the Motorola GP300 series / SP-50 / Sport 7X to wire the radio to a TW-47 DB-9M connector. Initially set the internal TW-47 jumpers S7 and S8 according to transmit gain requirements. To get a molded connector order Motorola part # HMN9787DR headset with swivel boom mic, cut off the headset end and wire the cable to the DB-9M connector.
Note: The wiring for this solution is not verified by Clear-Com applications engineering.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.