Partyline: How to build an in-line mic switch for a headset mic.

Owned by Administrator
Apr 06, 2019
1 min read
Buy a toggle or PTT in-line switch, which will lift pin 2 of the 4-pin XLR to the intercom's headset jack, will allow them to leave the talk latched and turn their mics on and off with unmolested camera shots.This will only work with a dynamic microphone.  Do not allow phantom voltage to be sent to the headset jack from the camera head, panel or BP.See attached photo for an example.One could also short pins 1 to 2...or use a make before break switch.
  File Modified

JPEG File PL HS switch.jpg PL HS switch.jpg

Apr 06, 2019 by Administrator

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.