Lever Key V-Panels

Using the ECS configuration application; Keys are assigned in the normal way by clicking on the required item in the list of available talk and listen labels then dragging the items to the required key and dropping them over the display corresponding to the key.

Two labels can be assigned to a single lever key, a listen on the upper key position and a talk on the lower key position.  No other key activation schemes are available for a lever key V-Panel.   

Pushbutton Key V-Panels

Using the ECS configuration application; Keys are assigned in the normal way by dragging items from the list of available sources and destinations to the required key and dropping them over the display corresponding to the key. 

Unlike the lever key panels only one label can be assigned to a key rather than two but key activation can be assigned unlike lever key panels. The key activation options is shown by right mouse clicking on the pushbutton 

Available key activations:

TALK sets a talk from the panel to a destination with no automatic listen to the destination. 

LISTEN sets a key to listen to the source without talking to the destination at the same time. 

TALK & LISTEN sets a talk key with listen. 

TALK & FORCED LISTEN sets a talk key with permanently made listen. 

DUAL TALK & LISTEN sets a dual talk and listen key (only on pushbutton panel types). Tap the pushbutton once to LATCH on the LISTEN route. Press and hold the button to activate a TALK route.Tap the pushbutton once to un-Latch the listen route.