Partyline: What are the accessory jack pinouts for a Kenwood TK-3301 to a TW-47 interface?
Question: I'm looking for the custom cable wiring to use a Kenwood TK-3301 portable 2-way radioon the 9-pin DB connector of a Clear-com TW-47. Do you have any information about this?
Answer: The TK-3301 radio uses 3.5mm and 2.5mm set of phone plugs to connect out to a remote speaker / mic. See the diagram below for the pin outs to the radio. To trigger the transmit function on the radio setup the VOX transmit function or incorporate the PTT function on the TW-47. The pin outs and dip-switch settings for the TW-47 can be found in the TW-47 manual: http://www.clearcom.com/userfiles/file/User%20Manuals/Partyline/Clear-Com_TW-40_Manual.pdf
Kenwood 2-pin wiring pin-outs
Answer: The TK-3301 radio uses 3.5mm and 2.5mm set of phone plugs to connect out to a remote speaker / mic. See the diagram below for the pin outs to the radio. To trigger the transmit function on the radio setup the VOX transmit function or incorporate the PTT function on the TW-47. The pin outs and dip-switch settings for the TW-47 can be found in the TW-47 manual: http://www.clearcom.com/userfiles/file/User%20Manuals/Partyline/Clear-Com_TW-40_Manual.pdf
Kenwood 2-pin wiring pin-outs
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.