HelixNet: Why does the IFB Program dim when in a channel with a 4-wire device
I have connected a audio feed to my HMS (PGM Input ) and configured the PGM as an IFB source and assigned it to channel. In the same channel I have also assigned a 4wire port
When I talk to the channel the PGM input dims as expected but it stays dimmed even when I stop talking on the channel . I would expect the PGM to return to its normal level after talking to the channel as per normal IFB operation
Answer: When a program feed is used with IFB dim level. If the program feed and a 4-wire interface are assigned to the same channel, make sure to add enable VOX to the 4-wire interface.
If there is no VOX enabled then the 4-wire will cause the program IFB to constantly dim. This does not depend on whether the program output on the 4-wire is muted or unmuted.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.