Versions Compared

Old Version 6

changes.mady.by.user Dalton

Saved on

compared with

New Version Current

changes.mady.by.user Andreas Schick

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...


Answer:  The CCI-22 rear card DB-9 connector on the Eclipse frame will tie into the rear panel  MS-702 A and B channel 3-pin XLR connectors. See the diagram below for the generic wiring scheme to link the Eclipse frame into the Encore Party-line system.
Image Removed

...

The Orange orange cables are standard CAT-5 or better cabling from the Eclipse MVX-A16 card to the rear interface card of the CCI-22, the . The cabling from the DB-9F connector to 3-pin XLR channels A and B on the MS-702 panel is a custom built cable, see . The DB9-M connector on the rear of the CCI-22 user manual for the pin outs on the DB-9 connector and offers pins for both channels. The second DB9-M connector is wired in parallel to the first and is not used in our case. See the MS-702 user manual for the pin outs out on the 3-pin XLR connector.   Standard 3-pin XLR microphone cable is used to connect the RS-601 beltpacks to the MS-702 main station.