...
Note
Connect all Grounds together (pin 1 of all connectors)
Connect all Supply Voltages together (pin 2 of all connectors)
Connect Pin 3 (6p XLR M) to Pin 3 (3p XLR F - Channel B)
Connect Pin 4 (6p XLR M) to Pin 3 (3p XLR F - Channel A)
Panel | ||||||
---|---|---|---|---|---|---|
| ||||||
Never connect connector shells to any pins or lugs |
6 pin XLR pin-out function (Male XLR connector)
Pin 1 = Ground
Pin 2 = Supply Voltage
Pin 3 = Intercom Audio/Channel B
Pin 4 = Intercom Audio/Channel A
Pin 5 = Program Audio input +
Pin 6 = Program Audio input -
Panel | ||||||||
---|---|---|---|---|---|---|---|---|
| ||||||||
Pins 5 and 6 are not used on the stock YC-36 |
3 pin XLR pin-out function (Female XLR connectors)
Pin 1 = Ground
Pin 2 = Supply Voltage
Pin 3 = Intercom Audio
Panel | ||||||||
---|---|---|---|---|---|---|---|---|
| ||||||||
Use one XLR per channel. |