Question- Would it be possible to use a V-series panel with a CC-95 connected for the listening, and at the same time use the gooseneck microphone for talking?
Answer - Yesyou Yes you can disable the auto-headset detect function. There are dip switches inside the panel
HEADSETAUTO DETECTV-Seriespanels HEADSET AUTO DETECT : V-Series panels can auto detect when a headset is plugged in and automatically enable them. Headsetauto Headset auto detect can be set to enabled or disabled via a DIP switch (SW2) on themain the main board. As headset insertion can cause a noise on the panel some users maywish may wish to disable automatic headset detect and use the front panel button insteadto instead to enable and disable the headsets. To access the DIP switch the rear covermust cover must be removed from the panel. The DIP switch is located on the right handedge of the main PCB (looking from the rear) behind the headset connector
On =auto-switch h/set mode detect enabled
OFF=auto-switch h/set mode detect DISABLED
