...
Multi-pair Cable: Individually shielded multi-pair cable is acceptable for use in multi-channel systems. For crosstalk considerations the shields must be tied together on both ends of the cable to produce the lowest possible DC resistance path for the ground return. Ideally, this should be less than 2 ohms.
Portable Installation Cable: Practical cable for portable system interconnections is flexible, two-conductor, shielded microphone cable. We suggest using BELDEN #8413 (24 Gauge). For runs longer than 500 feet (150m) use a 20 gauge cable or larger (BELDEN #8412).
Permanent Installation Cable: Vinyl-jacketed shielded pair is the cable of choice for permanent installations. Placing the cable in conduit is recommended but not necessary. .
For more information please refer to our Encore Installation Guide available on our website.
