Info |
---|
This guide makes the assumtion assumption that the E-IPA card will be PTP grandmaster grand-master and is using the E-IPA’s default protocol settings (pictured below) If using an external GM or custom protocol settings, make sure these differences are reflected in the E-IPA & Artel PTP Clock Configuration section of this guide. |
...
Configurtion Configuration → Green Ethernet → Port Power Savings:
Uncheck Power Saving for all ports connected to ClearCom Clear-Com devices
Click ‘Save’
...
Configuration → IPMC → IGMP Snooping → Basic Configuration:
...
Change the ‘QoS Class’ values for ‘DSCP 34 (AF31AF41)', and 'DSCP 46 (EF)’ to 4 and 7 respectively.
Check the ‘Trust’ box for both DSCP 34 and 46
...
Click the ‘Clock Instance’ of the new clock (Clock Instance 0 in this example) in order to open this ‘PTP Clock’s Configuation Configuration and Staus’ Status’ page and ammend amend settings under each header below
‘Port Enable and Confiuration’ Configuration’ : Check all ports that need to subscribe to PTP
‘Clock Default DataSet’ :
‘2 Step Flag’ = ‘True’
‘Dom’ = '0'
‘Protocol' = 'IPv4Multi’
‘DSCP’ = ‘46’
Click ‘Save’
...
Maintainance Maintenance → Configuration → Save Startup-config:
...