What are the connection details of the 700-26-18 HSL Fibre Interface?

Owned by Graham Balchin
May 22, 2018
1 min read

The Trilogy Fibre converter is used to extend the range of the Gemini High Speed Link (HSL). If the Gemini hosts are connected via a CAT6 cable the maximum cable length is 100 meters. If the distance is further the Gemini HSL ring will need a single Trilogy Fibre box at each site. The connector is a LC Duplex fibre connector and the fibre type is single mode. The connection from the Fibre Interface to the Gemini local HSL ring is via two RJ45 connectors.


Trilogy fibre interface specification:


Optical Fibre Interface For Gemini High Speed Link (HSL)
Provides bi-directional connection over single mode (1310nm) fibre up to 2km. One required per Gemini chassis.
Fitted with 2 x RJ45 (HSL) & 2 x LC fibre connectors.
Standalone enclosure (78x120x27mm). Includes PSU.


LC Connectors look like this >>>>



For further detail please refer to the Gemini Implementation guide.


Copyright, Trilogy Communications.
---------------
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent.