How to change the behavior of the "Cut" switch to enable headset operation

By Justin Emge
2 min

 

1, Connect a VGA monitor, Keyboard and Mouse to the MIU

 

2, If the unit is currently logged out of Windows, login using the following credentials:

Username: trilogy

Password: trilogy

 

3, From the desktop double click on the Config Editor Icon

 

4, Enter the following credentials:

 Operator: Admin (Capital A)

Password: trilogy

 

image-20241211-171730.png

5, On the selection list on the left pane click on the arrow next to Domains:

 

5.png

 6, Then the arrow next to Domain 1:

 

6.png

7, Then the arrow next to Host 1.1:

 

7.png

8, Then double click on the panel icon (H1S10):

 

8.png

9, You will now be in the panel editor. Set the Cut Switch action to ‘Panel/HSet Mic. Changeover’ as shown below:

9.png

10: Click on the ‘Upload’ button on the top right-hand side of the screen, then Select ‘Reset’ when prompted.

10.png

11, Save the file overwriting the existing file when prompted to save the config.

Related content

Copyright, Trilogy Communications.
---------------
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent.