/
Can I dial out to a telephone line using a ICS1008/16 panel

Can I dial out to a telephone line using a ICS1008/16 panel

Translate page

Do you happen to know if the ICS 1008E panel will still work with the HX-Delta/Median frame if I connect using an MVX card

  • Answer: yes ICS1008E panels will work on HX-Delta / Median frame

 

Can you confirm if it would be possible to connect an ICS panel to an LQ box then bring it in to the matrix using an IPA card.

  • Answer : for ICS panel you will need to use x2 LQ boxes. Any panel connect via  analogue (MVX) to LQ needs to have another LQ at the other end   

  • ICS panel > LQ <network>LQ > Matrix-MVX port

 

 Is it possible to trigger a DDI (speed dial) from the ICS panel that could call a SIP line on an LQ box interfaced to the frame.

  • Answer : yes this is possible – use a stacked key to trigger a speed dial

  • ICS panel <matrix>> LQ-SIP

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.