Can the HCI API route incoming source to IFB destinations

Using the HCI API for the Eclipse HX matrix can i do the following

 

1) Through the HCI protocol, it will be possible to route a incoming source to a stereo IFB

 Answer: Yes using the HCI protocol you can assign a incoming source to an IFB

The Eclipse-HX HCI provides the facility to route IFB-Callers, IFB-Sources, IFB-Destinations and IFB-Returns. as well as change the IFB label

Using the HCI protocol - 3rd party control / automation systems can adjust any part of the IFB audio chain

You can also use a HCI message to request to route a IFB-Caller which will trigger the IFB

 

2) Through the HCI protocol, it will be possible to emulate a panel key?

Answer: Yes through the HCI protocol, you can send a message that will emulate a key press on a panel.

You can also reserve special 3rd party keys on the panel. These 3rd parry keys are under full control of the 3rd party control / automation system in terms of labels , LED status, routing and latch state. The matrix hands over control of the key over to the 3rd party control / automation system example a Que-light or video system can use the intercom key as if its part of its normal control surface or one of its own control panel keys

 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT


This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..


The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.