/
FSII Edge Transceivers reporting region error

FSII Edge Transceivers reporting region error

The FSII Edge Transceivers are hard coded to specific country regions. The region settings in EHX V12 or later must match the Edge transceiver country code otherwise you will see a number of error messages on the system and beltpacks may not connect or pass audio

Note: the FSII Edge beltpacks are universal in that they set their RF frequency to match the Edge transceiver they are connected to.

 

You may see the following

This is printed after a download to the matrix when the following setting in Configuration > Preferences is changed:

The regions are as follows: (dated June 2020)

Region

Code

USA

0

Canada

1

Europe

2

Japan

5

Korea

10

Australia/NZ

12

 

 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.