/
Can I set Wireless Beltpack ports on 2 different E-IPA cards in HX matrix

Can I set Wireless Beltpack ports on 2 different E-IPA cards in HX matrix

    Translate page

     

    Jul 25, 2025

    Solution update using EHX V13.2.1 Service Pack Rev B or later , you CAN now roam across 2x IPA cards seamlessly

     

     

     

    Using EHX V12 you can configure Wireless Beltpack ports on 2 separate E-IPA cards in your frame. However, there are a number of limitations:

    a) Beltpacks cannot roam across cards.

    b) Clear-Com recommends, if you must have 2x E-IPA wireless cards that you place all 1.9Ghz IP transceivers on one IPA card and place all 5Ghz IP transceivers on the other card

    Note: If you are using only ONE IPA card then yes it is possible to have a mix of 1.9Ghz and 5Ghz on the same IPA card

     

    When you go to configure a 2nd IPA card you will see this warning message

     

      CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

      This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

      The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.