Published May 11, 2020
Matrix: Is the Aux LS on V-Series Panels Pre/ Post LS Cut?
On the V-Series (IRIS & NON-IRIS) Panel’s Auxiliary Audio Connector (DB-25M), the Aux LS signal is POST LS Cut.
This means that if you were to engage the LS Cut on the front of a V-Series Panel, the signal would not pass through to the Aux LS Output (Pin 10, 23; DB-25M).
Looking for labels? They can now be found in the details panel on the floating action bar.
Related content
Matrix: Muting a Forced Listen on a V-Series Rotary panel does not work
Matrix: Muting a Forced Listen on a V-Series Rotary panel does not work
More like this
Matrix: Is it possible to disable the headset detect on the V-series panel
Matrix: Is it possible to disable the headset detect on the V-series panel
More like this
Matrix: Is it possible to disable the headset detect on the V-series Iris panel
Matrix: Is it possible to disable the headset detect on the V-series Iris panel
More like this
Matrix: V-Iris panel Auxiliary power on DB25 audio connector
Matrix: V-Iris panel Auxiliary power on DB25 audio connector
More like this
Matrix: IFB audio, can I switch the PGM via GPI or panel key
Matrix: IFB audio, can I switch the PGM via GPI or panel key
More like this
How do I verify AES67 audio is going out of my Iris panel?
How do I verify AES67 audio is going out of my Iris panel?
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.