LQ Lab Series 5.2 - SIP Registration in LQ

LQ Lab Series 5.2 - SIP Registration in LQ

Use this article to register an LQ SIP account to a SIP server, PBX, or cloud SIP provider, confirm the registration status in LQ CCM, assign the SIP port to a channel, and perform a basic SIP call test.

This example uses a Grandstream SIP server. The same LQ-side workflow applies to other SIP servers when the correct server details and credentials are available.

2. Before You Start

Confirm the following before configuring SIP:

  • LQ is powered and reachable on the network.

  • LQ IP address is known.

  • CCM access is working.

  • SIP license is available.

  • SIP server IP address or hostname is known.

  • SIP username / extension and password are available.

  • SIP port and transport are known.

  • SIP server and LQ are on a reachable network path.

3. Connection Diagram

Screenshot 2026-09-16 at 15.15.40.png

Example devices shown:

  • LQ-R2W4-4W4, LAN 1 connected to network switch

  • SIP server: Grandstream server

  • SIP telephone: Extension 1002

  • Computer - CCM

  • Network switch / gateway: 192.168.1.1

4. SIP Registration in LQ CCM

Screenshot 2026-09-16 at 15.18.11.png

Open the LQ CCM in a browser:

  1. Go to Accounts.

  2. Select SIP from the left menu.

  3. Add or select the SIP Server Setting

  4. Enter the SIP server details.

  5. Enter the SIP Account User (SIP Extension) and Password

Example SIP server settings

Field

Example Value

Field

Example Value

Label

SIP 1

Registrar / Proxy IP / Hostname

192.168.1.217

Registrar / Proxy Port

5060

Domain

Not Set

SIP Transport Protocol

UDP/TCP

SIP Transport Port

5060

NAT Keep-Alive Format

UDP

NAT Keep-Alive Interval

15 seconds

Add the LQ SIP account

Field

Example Value

Field

Example Value

Label

sip2

User (SIP Extension)

1001

Password

SIP account password

LQ Assignment

LQ-R2W4-4W#1

Status

Green / registered

The SIP user / extension and password must match the account created on the SIP server.

5. Assign the SIP Port to a Channel

Screenshot 2026-09-16 at 15.50.21.png
  1. Go to Assignments and on Channels view:

  2. Locate the SIP port, for example sip2.

  3. Add the SIP port to the required channel.

  4. In this example, sip2 is assigned to Channel 1.

SIP registration only confirms that the LQ has connected to the SIP server. The SIP port still needs to be assigned to a channel before it can be used for audio testing.

6. Place a SIP Test Call from CCM

Screenshot 2026-09-16 at 15.58.37.png
  1. On the assigned SIP port, click the phone / call icon

  2. Enter the target SIP extension or number and dial to SIP Phone (e.g ext 1002) by click the Dial out button.

  3. Call status “In progress” and SIP status: Ringing ( SIP Phone should be ringing)

  4. SIP Status: Ok - When SIP phone picks up the call.

  5. Green light - Audio passing through

Expected call states

Stage

Expected Indication

Stage

Expected Indication

Dial entry

Extension number entered and ready to dial

Call starting

Call Status: In progress

Ringing

SIP Status: Ringing

Connected

SIP Status: OK

Active call

Green status indicator on the SIP port

7. SIP Status Messages

Insert the SIP status message screenshot here.

Message / Status

Meaning

First Check

Message / Status

Meaning

First Check

 

image-20260916-080846.png
Invalid undername/password

 

SIP server rejected the login details

Check username, authentication ID, and password

 

image-20260916-080936.png
Request Timeout

LQ did not receive a response from the SIP server

Check IP address, network path, SIP port, firewall, and server status

 

image-20260916-081028.png
Online / green check

SIP account is registered successfully

Continue to channel assignment and call testing

8. Common Problems and First Checks

Problem

First Check

Problem

First Check

SIP account does not register

Check username and password

Request Timeout

Check SIP server IP address, port, network path, firewall, and SIP server status

SIP server reachable but registration fails

Confirm whether authentication ID, domain, or transport setting is required

SIP port is registered but no audio path

Confirm the SIP port is assigned to the required LQ channel

Call rings but does not connect

Confirm the target SIP extension / phone is online and registered-

 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT


This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..


The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.