/
LQ: Accessing to CCM

LQ: Accessing to CCM

Translate page

Table of Content:

Purpose

Use this article when setting up a new or reset Clear-Com LQ unit for the first time.

The goal is to access CCM, confirm network access, and configure the LQ with the correct static IP address before linking or further configuration.

 

Physical Layer / Power Check

Confirm the LQ is powered correctly.

  • Portable LQ units can be powered by PoE when connected to a PoE-capable switch or PoE injector.

  • Rackmount LQ-R units require PSU power.

Method 1: Direct PC to LQ Using Link-Local IP

Screenshot 2026-07-20 at 14.12.39.png

Steps:

  1. Connect the PC directly to the LQ LAN1 port.

  2. Power on the LQ via PSU

  3. Check the LQ front panel for the IP address.

  4. If the LQ IP starts with 169.254, set the PC Ethernet adapter to a matching 169.254.x.x address.

  5. Open a browser.

  6. Enter the LQ IP address - e.g 169.254.100.100

  7. Log in to CCM.

    1. Default Username: admin

    2. Default Password: Check the LQ Front panel menu > Networking > CCM Password>

 

Method 2: LQ Connected to Network Switch with DHCP (Preferred)

Screenshot 2026-07-20 at 14.12.08.png

Steps:

  1. Connect the LQ LAN1/POE port to the network switch. *If you are using the LQ-R model, PSU is required to power the unit.

  2. Connect the PC to the same switch or same VLan.

  3. Power on the LQ.

  4. Confirm the LQ is set to DHCP

    1. Front panel menu > Networking > Edit > DHCP > Enable

  5. Check the LQ front panel for the DHCP IP address.

  6. Open a browser.

  7. Enter the LQ IP address - e.g 192.168.1.100

  8. Log in to CCM.

    1. Default Username: admin

    2. Default Password: Check the LQ Front panel menu > Networking > CCM Password>

Screenshot 2026-07-20 at 14.18.43.png
Login Page
Screenshot 2026-07-20 at 14.17.55.png
Main Page upon successful login

 

The setup is complete when:

  • LQ CCM is accesible

Next: https://clear-com.atlassian.net/wiki/x/HoBNKAE

 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.