FSII Beltpack Roaming between E-IPA-HX Cards

FSII Beltpack Roaming between E-IPA-HX Cards

EXH v14.1 and up
FreeSpeak beltpacks (FS II and Icon)

FS II and Icon beltpacks can roam between E-IPA cards as long as the following criteria are met:


a) Your AES67 network is correctly configured. You need an external PTP to clock each card and to take into account the maximum number of endpoints the clock can handle. See AoIP Network Recommendations document

see Eclipse Knowledge center Eclipse HX Knowledge Center2


b) You must have sufficient wireless ports on each E-IPA card. For example, if you have 48 beltpacks, each E-IPA card must have 48 ports of type Access - Wireless. As long as you do this, if one card fails, there is sufficient capacity on the other card for all the beltpacks to roam.

 

In this example we have 20x IPTs spread across 2x IPA cards

Each IPA card is feed by a GPS locked PTP GM

Each IPA card has 40x FSII BP ports allocated to it , this is the max number of active BPs on the system

If the any of the elements in the GOLD path -fail (GM, switch or IPA card) then the beltpacks would auto-roam to the IPTs on the BLUE path

FSII BPs can roam seamlessly between Gold or Blue antennas

Variations using single PTP GM driving both IPA card or a single upstream switch can also be deployed depending on how much redundancy is required

image-20260803-164657.png

 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT


This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..


The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.