/
Arcadia: How do I program the PTT (logic) on a XLR7 beltpack

Arcadia: How do I program the PTT (logic) on a XLR7 beltpack

    Translate page

    I am trying to configure a PTT on a FSII BP / Edge BP X7 beltpack but it can’t figure out how to do that using Arcadia CCM

     

    Using Arcadia V4.x or later firmware

    in the CCM go to the role for the FSII BP or FS Edge BP and select the role options pane (yellow highlighted box)

    image-20260508-110106.png

     

    scroll down to the logic inputs section and select the function you want the PTT/ logic to trigger

     

    image-20260508-110228.png

     

     

     

    In order to activate PTT 1 or PTT 2 the user will need to take PTT logic on pin 6 or pin 7 and ground it to pin 3 via a switch closure. 

     

      CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

      This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

      The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.