Wireless: Key Activation - (Momentary, Latching, etc.) in EHX
Using EHX v14.1 or later,
There are three types of key activation behaviour available on most panels and wireless units
They can be configured in the Panel configuration screen per key by right-clicking and selecting the desired mode.
Latch Disable On
Latching of the key is not possible with this mode selected. The key is active only for as long as the key is held. Releasing the key after any amount of time held will deactivate the key.
AKA Momentary switching or PTT
Latch Disable Off (Default)
The key will behave as a momentary key for as long as the key is held. Releasing the key after more than one second held will deactivate the key.
A short tap of the key will latch or unlatch the key.
Always Latch
The key will only behave as a latching key. Pressing the key for any amount of time will always latch or unlatch the key.
in the example below using a FS ICON BP , you can set the keyset behaviour for the main ABCD keys as well as 4 extra keys on the side